Brookhaven, Pennsylvania
Need a locksmith in Brookhaven? We come to you
We come out to Brookhaven for car, home and business lock work.
Where
Brookhaven
What we cover
Delaware County, Pennsylvania
How we work
We are a mobile locksmith. We come to you.
Locks around here
Brookhaven has a mix of older and newer doors, and that shows up in the hardware. Some homes still use rim locks or mortise locks with worn trim and stiff bolts, while others have bored cylindrical sets that no longer latch cleanly because the latch, cylinder, or actuator has started to wear. On commercial doors in Brookhaven, we also see narrow-stile hardware and heavy mortise sets that can stick, bind, or fail at the cylinder. A worn key, a loose set screw, or a tired latch can be enough to stop the lock from working.
Cars, homes and businesses
Brookhaven lockouts can involve a car door that will not open, a house lock that needs to be opened, or a business door that will not give way to the right key. Car Lockout work means getting the vehicle open and checking the lock, handle, and key path for the problem. Residential Locksmith work can mean changing or rekeying home locks, repairing worn cylinders, or dealing with keys that no longer turn cleanly. Commercial Locksmith work often involves mortise locks, panic hardware, and doors that have seen heavy use in Brookhaven.
What we need to know first
Before we start, it helps to know what type of lock you have, whether the key is lost, broken, or stuck, and whether the door is open, closed, or already latched. If you can describe the hardware, that helps too: rim, mortise, or bored cylindrical, plus any deadbolt, keypad, or broken key in the lock. For Brookhaven jobs, it also helps to know whether the issue is at a car, a home, or a business door, because the setup changes what we do at the lock and the key.
Lock work in Brookhaven
-
01
Car Lockout
Open a locked vehicle for its owner.
Read more -
02
Residential Locksmith
Locks, cylinders, deadbolts and keys on a home, the strike and its pocket, reinforcement plates, long screws.
Read more -
03
Commercial Locksmith
Locks, cylinders, master keys and exit hardware on business premises.
Read more
Jobs we have done
Worth knowing
Around Brookhaven
Older front doors in Brookhaven can be the hardest when they have bored cylindrical hardware and a worn keyway. The knob set may turn rough, the latch may drag, or the cylinder may feel sticky after years of use. Painted-over trim rings and loose internal parts can add to the trouble, especially when the lock has been forced before. We open those locks, inspect the cylinder and latch body, and work on the hardware at the door rather than treating the problem like a simple key issue.
Commercial doors with mortise locks can give a different kind of trouble. The case sits deep in the door, so wear inside the lock body, a tired lever set, or a damaged trim piece can make the door hard to work with. In Brookhaven, that often shows up on doors that have seen heavy use and repeated key turns. We open the lock, check the mortise case, and deal with the parts that bind, seize, or no longer move cleanly under the key.
Rim locks and older residential deadbolts can also be stubborn, especially on side and rear doors that get used less often. The key may enter, but the cylinder can still hang up because the lock has dried out, the internal parts have worn, or the mechanism has been forced in the past. We see the same trouble on barred storm doors and older metal-clad doors. The work starts at the lock body and the keyway, with care given to the parts that keep the door closed and secured.
Questions
My front door sticks when the key turns; is that usually the lock or the door?
Usually the lock, the key, or both, but we check the whole setup first. Sticky entry doors, older side doors, and heavy commercial doors give the most trouble because the latch and cylinder get pulled out of line as the door moves. We look for worn keys, binding parts, and locks that need to be opened and adjusted at the lock itself.
I broke my house key in the deadbolt; what should I expect before you open it?
We will look at how much of the key is still in the keyway and whether the lock is already tight from wear. Broken key calls can involve the fragment, the cylinder, and the rest of the lock, especially on older bored cylindrical and mortise locks. We open the lock first, then deal with the broken piece and the keyway.
My car key only works after I jiggle it, so what do you check on that kind of lock?
We check the key wear, the door lock, and the ignition lock if the same key is used for both. A key that has worn down can start to bind in the lock and act like the lock is failing. We also look for dirt, bent parts, and internal wear that keeps the lock from turning cleanly.