Paschall, Pennsylvania
Need a locksmith in Paschall? We come to you
We come out to Paschall for car, home and business lock work.
Where
Paschall
What we cover
Philadelphia, Pennsylvania
How we work
We are a mobile locksmith. We come to you.
Locks around here
Paschall has a lot of older doors with mixed hardware, so the issues tend to start at the lock body, the cylinder, the knob or lever set, and the strike side of the setup. On wood doors, screws loosen, keys wear the cylinder, and a latch can stick or drag. On metal doors, mortise lock parts can bind, and bored cylindrical sets can fail at the latch or the trim. In Paschall, we look at the lock as it sits, then open it and work on the part that is not holding up.
Cars, homes and businesses
In Paschall, cars, homes, and businesses each bring a different kind of lock work. A car lockout can involve a door lock, a trunk lock, or a key issue that keeps the vehicle sealed. Residential locksmith work can mean a front door, a side entry, or a deadbolt, knob, or lever set that no longer responds cleanly. Commercial locksmith work often turns on heavier mortise hardware, office doors, storefront locks, and keyed access that needs to be opened and reset by hand.
What we need to know first
Before we start in Paschall, it helps to know what kind of lock is on the door or vehicle, what the key does when it goes in, and whether the lock turns partway, sticks, or does not move at all. It also helps to know if the hardware is rim, mortise, or bored cylindrical, and whether there is one lock or more than one on the door. If the key is worn, bent, or missing, that changes the work at the lock and the keyway.
Lock work in Paschall
-
01
Car Lockout
Open a locked vehicle for its owner.
Read more -
02
Residential Locksmith
Locks, cylinders, deadbolts and keys on a home, the strike and its pocket, reinforcement plates, long screws.
Read more -
03
Commercial Locksmith
Locks, cylinders, master keys and exit hardware on business premises.
Read more
Jobs we have done
Worth knowing
Around Paschall
Paschall brings together rowhouses, small storefronts, and older mixed-use buildings, so the door hardware is not one thing from one era. We find rim locks on older wood doors, mortise bodies behind narrow trim, and bored cylindrical sets on newer replacements. Some doors carry patched escutcheons, changed knobs, mismatched cylinders, or deadbolts added after the original lock. That means the work starts with identifying what is actually mounted, how the latch sits in the door, and what parts move cleanly before we open the lock and service the hardware on site.
In Paschall, the door hardware on apartments and street-level businesses often shows more than one change over time. A mortise lock may still be in place under a newer lever set, or a bored cylindrical lock may sit beside an added deadbolt and a tired strike setup. We look at keyways, trims, knobs, levers, and cylinder bodies as they are installed, not as the door might have started out. That lets us open the lock, repair what is worn, and reset the parts that no longer match the door.
We also see a mix of residential and commercial doors with hardware that has been serviced by more than one hand. A key may work a sticky rim cylinder one way and bind in a worn mortise cylinder the next. Some doors have one lock type on the front and another on a rear entry, while newer storefronts may use simple bored cylindrical hardware where an older building once had heavier parts. The work is to match the lock body, latch, and cylinder to the door in front of us, then open the lock and keep moving through the hardware.
Questions
I just moved into a Paschall rental and the front door still has the old tenant’s key, what changes first?
We start by checking whether the lock should be rekeyed, repaired, or replaced, since rentals often change hands with keys still out there. We look at the cylinder, the keyway, and the condition of the hardware before we do any work. If the lock has been forced or worn by repeated turnover, we adjust the approach to match the door and the lock.
My apartment key turns halfway and sticks in the deadbolt, what do you look for first?
We look for wear in the key, a tired cylinder, and any buildup or damage inside the lock. A key that turns partway and binds can point to more than one issue, so we check the lock itself before deciding on repair or replacement. If the lock opens, we can keep going with the next step on the hardware.
I lost the only key for my office door, and the same door gets used by different tenants often.
We focus on rekeying, not just getting one key made, since changing tenants can leave too many old keys in circulation. We check the lock style, the keyway, and whether the hardware should stay in place or be changed out. For shared or rotated spaces, that matters because one door can end up tied to several old keys and several past users.